Hansgrohe Raindance Royale S 350 AIR 28420001 Instrucciones De Montaje / Manejo / Garantía página 12

3

4
1
17 mm
5

2.5 mm
12
1
2
6 mm
2
1
2
4
English
Drill the screw holes with a 6 mm drill bit suit-
able for the wall surface (1,2).
Install the anchors ().
Wrap the threads on the nipple with Teflon
thread tape (1).

Install the mounting piece using a 17 mm
wrench ().
Secure the mounting piece to the wall with the
four screws (1).
Position the shower arm over the mounting
piece (2).
Tighten the set screw using a 2.5 mm allen
wrench ().
Thread the escutcheon over the mounting
piece by turning it clockwise (4).
Do not drill into water line!
Seal the wall around the an-
chors with waterproof sealant.
Failure to seal the wall can lead
to possible water damage.
Seal the wall around the nipple
with waterproof sealant (2).
Failure to seal the wall can lead
to possible water damage.