PRESIDIUM Synthetic Ruby Identifier Manual Del Usuario página 8

The capabilities of the Synthetic Ruby Identifier are as follows:
• Help to identify most synthetic flame fusion rubies
• Tests on rubies within a range in dimension from 3 mm in width and
up to 6mm in height (approx. 0.1 to 6 carat size)
• Tests on polished rubies of common shapes such as round-cut,
oval-cut, princess cut, brilliant round cut, emerald cut, baguette cut,
square brilliant cut, step cut and mixed cut
• Can be used on both loose stones and rubies mounted on jewelry
with open-back setting
• Complete testing almost instantaneously
The user is cautioned against using the Synthetic Ruby Identifier
on the following as it may affect the accuracy of the readings:
× Unknown stones (users should only test on known rubies)
× Rough, unpolished stones
× Stones that are more than 6mm in height as the specific UV
wavelength has limited ray reach
× Opaque or translucent stones, and stones of dark red shades
× Testing if the stone has been subjected to treatments such as heat
irradiation and glass-filling
× Testing to identify other forms of synthetically created rubies such
as synthetic hydrothermal or synthetic flux stones
× Mounted stones more than 6mm in height on ring jewelry with
inside diameter measuring larger than 14.88mm (Italy ring size 6)
The Synthetic Ruby Identifier features the following:
• The world's first and only technology that measures a gemstone's
UV light transmittance ability with a specific deep-wave UV to help
identify synthetic flame fusion rubies
• 7 colour coded (blue/red) indicator light bars to give a clear low or
high reading of light transmittance
• Instantaneous clear results within 2 seconds
• Exterior rubber pads on base to ensure non-slip sturdiness and
prevent scratches to surfaces
• Stream-lined ergonomic design that enhances portability and
stability
• Low battery indicator
• Energy-saving auto power-off of device after 10 minutes without
operation
• Interior LED light source and testing area
• Energy-saving auto power-off of interior LED light source when lid of
device is open or when Start Test button is not activated
• New technology and power connectivity
6