Tabla de contenido
Idiomas disponibles
Idiomas disponibles
================================================================================================
ATTACH END PANELS TO TRAY
Step 1.
1a. Attach the two End Panels (5)
to the Tray (3) using the following
as illustrated:
x6 Round Hd Screws (13)
5/16" x 3/4"
x6 Flat Washers (29)
5/16"
x6 Lock Washers (16)
5/16"
x6 Hex Nuts (15)
5/16"
INSTALL DRAWBAR
Step 2.
2a. Install drawbar (4) to the
tray (3) using the following
as illustrated:
x2 Round Hd Screws (13)
5/16" x 3/4"
x2 Lock Washers (16)
5/16"
x2 Hex Nuts, 5/16" (15)
2b. Attach Clevis (1) to Drawbar using the
following as illustrated:
x2 5/16" x 1" Rd Hd. Screws (14),
x2 Lock Washers, 5/16" (16)
x2 Hex Nuts, 5/16" (15)
2c. Attach Transport Lock Pin (24) to End Panel
(5) using one 5/16" Lock Washer (16) and 5/16"
Hex Nut (15), as shown.
NOTE: The inside distance between the
two end panels should be 41 inches
to ensure proper installation.
All manuals and user guides at all-guides.com
ASSEMBLY
5
16
15
29
13
3
3
16
41"
13
15
5/16" Hex Nut
Qty. 5
Page 5
29
5/16" Flat Washer
Qty. 6
13
5/16" x 3/4" Rd Hd Screw
Qty. 6
15
4
16
15
14
15
16
16
5/16" Lock Washer
Qty. 6
15
5/16" Hex Nut
Qty. 6
1
14
5/16" x 1" Round Hd
Screw | Qty. 2
13
5/16" x 3/4" Round Hd
5
Screw | Qty. 2
24
24
Transport Lock Pin
Qty. 1
16
5/16" Lock Washer
Qty. 5
L-1643BH-H
Capítulos
Tabla de contenido
