Assembly - Brinly SAT-40 BH Manual Del Propietário

Step 1. ATTACH END PANELS TO TRAY
1a) Attach the two End Panels (5)
to the Tray (3) using six 5/16" x3/4"
Rd Hd. Screws (13), 5/16" Flat
Washers (29), 5/16" Lock Washers
(16) and 5/16" Hex Nuts (15), as
shown.
Step 2.
INSTALL DRAWBAR
2a) Install Drawbar (4) to
Tray (3) using two 5/16" x3/4"
Rd Hd. Screws (13), 5/16"
Lock Washers (16) and 5/16"
Hex Nuts (15), as shown.
2b) Attach Clevis (1) to
Drawbar using two 5/16" x 1"
Rd Hd. Screws(14), 5/16"
Lock Washers (16) and 5/16"
Hex Nuts (15), as shown.
2c) Attach Transport Lock
Pin (24) to End Panel (5)
using one 5/16" Lock Washer
(16) and 5/16" Hex Nut (15),
as shown.
NOTE : The inside distance
between the two end panels
should be 41 inches to
ensure proper installation.

ASSEMBLY

5
16
15
29
13
3
3
15
16
41"
13
15
5/16" Hex Nut
Qty. 5
29
5/16" Flat Washer
Qty. 6
13
5/16" x 3/4" Rd Hd Screw
Qty. 6
15
4
16
1
14
15
16
5
24
16
5/16" Lock Washer
Qty. 5
16
5/16" Lock Washer
Qty. 6
15
5/16" Hex Nut
Qty. 6
14
5/16" x 1" Rd Hd Screw
Qty. 2
13
5/16" x 3/4" Rd Hd Screw
Qty. 2
24
Transport Lock Pin
Qty. 1
4.
L-1643BH-