Start-Up And Use - Hotpoint Ariston FK 89 EL P.20 X /HA S Manual De Instrucciones

Ocultar thumbs Ver también para FK 89 EL P.20 X /HA S:
Tabla de contenido
Idiomas disponibles
  • ES

Idiomas disponibles

Start-up and use

! The first time you use your appliance, heat the empty oven with
its door closed at its maximum temperature for at least half an
hour. Make sure that the room is well ventilated before switching
the oven off and opening the oven door. The appliance may emit
a slightly unpleasant odour caused by protective substances
used during the manufacturing process burning away.
! To make the setting process easier, keep the knob in
position: this will increase the scrolling speed of the numbers
on the display.
! Each setting will automatically be stored in the appliance
memory after 10 seconds.
! The touch controls cannot be activated if the user is
wearing gloves.
Some models are equipped with a system of hinges which
allows the door to close slowly, without the user having to
follow the movement through with his/her hand. To use the
system correctly, before closing the door:
• Open the door fully.
• Do not force the closing movement manually.
Control panel lock
! The control panel can be locked while the oven is off, once
cooking has started or finished and during programming.
To lock the door and the oven controls, press and hold the
button for at least 2 seconds. A buzzer sounds and the
display shows the key symbol "n—O". The
icons, when lit, indicate lock function activation.
To deactivate the lock, press and hold the
for at least 2 seconds.
! When cleaning the appliance, the door lock may be closed
accidentally (there is an exposed spring). If this happens,
reopen it by turning the door lock upwards (see figure).
KO
OK
Setting the clock
! The clock can only be set when the oven is switched off. If
the oven is in standby mode, pressing the
display the current time setting. Press it again to set the time.
After connection to the power supply network or after a
blackout, the
button and the digits on the display will
flash for 10 seconds.
! When inserting the shelf
make sure the backstop is
at the rear of the cavity (see
image).
and
button again
button once will
To set the clock:
1. Press button
.
2. Turn the TIMER knob towards " " and " " to adjust the
hour value.
3. Once you have reached the correct hour value, press
the
button.
4. Repeat the above process to set the minutes.
If a blackout occurs, it will be necessary to reset the clock.
If the
icon flashes on the display, this indicates that the
clock has not been set correctly.
Setting the minute minder
! The minute minder may still be set whether the oven is
switched on or off. It does not switch the oven on or off.
When the set time has elapsed, the timer emits a buzzer
that will automatically stop after 30 seconds or when any
active button on the control panel is pressed.
To adjust the timer proceed as follows:
1. Press button
.
2. Adjust the time as desired by turning the TIMER knob
towards " " and " ".
3. Once you have reached the desired value, press the
button again.
The lit
symbol will remind you that the minute minder
is on. The DISPLAY will show the countdown.
To cancel the minute minder, press the
the knob to set the time to 00:00. Press button again.
The
icon will switch off to indicate that the minute minder
has been disabled.
Starting the oven
1. Switch the control panel on by pressing the
The appliance buzzer sounds three times (ascending) and
all buttons light up in sequence.
2. Select the desired cooking mode by turning the
SELECTOR knob. The display shows:
- the temperature associated with the mode, if programming
manually;
- "Auto" and the duration alternately, if programming is
automatic.
3. Press the
button to begin cooking.
4. The oven will begin its preheating phase, the preheating
indicators will light up as the temperature rises.
5. When the preheating process has finished, a buzzer sounds
and all the preheating indicator lights show that this stage has
been completed: the food can then be placed in the oven.
6. During cooking it is always possible to:
- modify the temperature by turning the THERMOSTAT
knob (manual modes only);
- set the duration of a cooking mode (see Cooking Modes);
- press the
button to stop cooking. In this case the
appliance stores the temperature modified previously in its
memory (manual modes only);
- switch off the oven by pressing the
7. If a blackout occurs while the oven is already in operation,
an automatic system within the appliance will reactivate the
GB
button and use
button.
button for 3 seconds.
23
Tabla de contenido
loading

Tabla de contenido