Skip Search - Kenwood KDC-X702 Manual De Instrucciones

CD/USB/iPod/ANDROID
For ANDROID 1/ANDROID 2/ANDROID source
1 Press J / K to enter character search.
2
Turn the volume knob to select the character.
^A^: Upper case letters (A to Z)
_A_: Lower case letters (a to z)
-0-: Numbers (0 to 9)
*** : Character other than A to Z, 0 to 9
3
Press the volume knob to start searching.
• To return to the root folder/first file/top menu, press 5. (Not applicable for
BT AUDIO source.)
• To return to the previous setting item, press
• To cancel, press and hold
Direct Music Search
(using the remote control)
1
Press DIRECT.
2
Press the number buttons to enter a track/file number.
3
Press to search for music.
• To cancel, press or DIRECT.
• Not available if Random Play is selected.
• Not applicable for iPod 1, iPod 2, iPod USB, ANDROID 1, ANDROID 2 and
ANDROID source.
Settings to use KENWOOD Remote application
KENWOOD Remote application is designed to control the KENWOOD car
receiver's operations from the iPhone/iPod (via USB input terminal).
Preparation:
Install the latest version of KENWOOD Remote application on your device
before connecting. For more information, visit
<www.kenwood.com/cs/ce/>.
You can make the settings in the same way as connection via Bluetooth.
( 27)
12
ENGLISH
.
.
Other settings
1 Press the volume knob to enter [FUNCTION].
2 Turn the volume knob to select an item (see the following table),
then press the knob.
3 Repeat step 2 until the desired item is selected or activated.
4 Press and hold to exit.
To return to the previous setting item, press
USB
MUSIC DRIVE DRIVE CHANGE: The next drive ([DRIVE 1] to [DRIVE 4]) is selected
automatically and playback starts.
1 3
Repeat steps to to select the following drives.

SKIP SEARCH

0.5%/1%/5%/10%: While listening to iPod 1, iPod 2, iPod USB,
ANDROID 1, ANDROID 2 or ANDROID source, selects the skip search ratio over
the total files.
.
Default: XX