Troubleshooting - Tronic TLAL 2 A1 Manual Del Usuario

Troubleshooting

A connected device does not charge
(the operating LED 3 does not light
up white)
No connection to the vehicle socket.
♦
Check the connection.
Depending on the vehicle type, it is pos-
♦
sible that the ignition has to be switched
on first.
The operating LED 3 goes out after
a device has been connected.
The car charger adapter is overloaded
♦
and will no longer charge attached
devices. The internal overcurrent protec-
tion has been triggered. Disconnect all
connected devices from the car charger
adapter. The white operating LED 3
lights up immediately and the car charg-
er adapter is ready for use again.
│ GB │ IE
■ 18 TLAL 2 A1