Idiomas disponibles
Idiomas disponibles
SIARR
11 - 104
PREPARATION
* Remove the tail lights.
* Remove the bumper :
° each side :
° Pull away the rim of the rear fender, then remove the bumper clip.
° 2 screws at the end of the fender, 2 screws under the tail lights, 4 screws under the bumper.
° 2 screws behind the license plate (remove the rivets).
* Make the cut under the bumpers as scribed.
ASSEMBLY
* Attach without tightening the attachment arms A and B to
the inside of the rails at points W-X using screw sets W and X.
* Attach without tightening the hitch assembly to points V-W
using screw sets V and W.
FINISHING
* Tighten all screw sets as indicated in the following order: X – W – V.
* Reassemble the elements previously removed.
* Attach the hitch head at point Y as well as the electrical support using its screw set.
FASTENING KIT
2 HM10x35 screws cl8.8
2 10,5/35 plain washers
W
2 DEC10 washers
2 HM10 nuts cl8.8
2 HM10x35 screws cl8.8
2 10,5/35 plain washers
X
2 DEC10 washers
2 HM10 nuts cl8.8
M16
AC8.8
19,5daNm
M12
M16
AC10.9
27,5daNm
M10
M12
AC8.8
8,1daNm
M10
ASSEMBLY INSTRUCTIONS
2 HM10x30 screws cl8.8
V
2 DEC10 washers
2 HM16x45 screws
Z
2 DEC16 washers
2 HM16 nuts
2 HM12x60 screws
Y
2 DEC12 washers
2 HM12 nuts
TORQUES :
AC10.9 11,4daNm
M8
AC8.8
AC8.8
4,7daNm
M8
AC10.9
AC10.9
6,7daNm
Type
Type
SI066
Approval No.
Tow bar for
VW Tiguan
e24*94/20*00*0100
(Standard)
NB : Electrical diagram inside our universal or custom wiring kits.
PLEASE NOTE : (to familiarise yourself with the operating charasteristics refer to the log)
2,3daNm
If this tow bar is fitted in accordance with our recommendations it will give a complete-
3,3daNm
ly satisfaction. We cannot accept any responsability in the event of changes to or
improper use of this item.
FICHIER : BUREAU\NOTICEDEMONTAGE\SIARR\NDM11\NDM11104-B - FOLIO NDMANG
321745600001
Max. Total
Max. Total
Authori. Weight Towable Weight
2 500 kg
2 240 kg
Max. Verti-
Value
cal load
D
100 kg
11,59 kN
