P R O B L EM S, C AU SE S A ND SO LU T I O NS
PROBLEM
Coffee does not
come out.
Coffee comes out
around the edge of
the porta-filter.
Milk is not foamy
after frothing or it is
not coming out of
the frothing tube.
Coffee comes out
too quickly.
Coffee is too weak.
The three control
panel lights
are flashing
alternatively.
CAUSES
• No water in reservoir.
• Coffee grind is too fine.
• Too much coffee in the filter.
• Appliance was not turned on
or plugged in.
• Coffee has been tamped/
compressed too much.
• Porta-filter not rotated to full
lock position.
• Coffee grounds around the
filter basket rim.
• Too much coffee in the filter.
• Ran out of steam.
• Milk is not cold enough.
• Frothing tube is blocked.
• Ground coffee is too coarse.
• Not enough coffee in filter.
• Using small filter for double
shot of espresso.
• Ground coffee is too coarse.
• Water tank is out of water.
En gli sh -13
SOLUTIONS
• Add water.
• Grind medium ground coffee.
• Fill filter with less coffee.
• Plug unit into electrical outlet
and turn it on.
• Refill filter basket with coffee
DO NOT TAMP too much.
• Rotate filter holder to full
lock position.
• Wipe off rim.
• Fill with less coffee.
• Ensure there is enough water
in the water reservoir.
• Chill milk and frothing pitcher
prior to making cappuccino
or latte.
• Follow the instructions to
clean the milk reservoir &
frothing tube.
• Use a finer grind.
• Use more coffee.
• Use large filter for double shot
of espresso.
• Use a finer grind.
• Add water to reservoir.