Volvo XC60 Manual Del Usuario página 10

EN Load carriers, for integrated rails
Load carriers
─ Carefully install the load carriers on the roof
trim strip (integrated rail). Transfer the
mounting (1) so that it is against the roof trim
strip on both sides of the car.
─ Insert the mounting plate (2) towards the roof
trim strip.
─ Screw in the screw without tightening it fully.
─ Check that the rubber shim is correctly
positioned and that the load carriers are
straight.
─ Tighten the screw using the torque wrench.
NOTE
Always use the enclosed torque wrench and
tighten until it clicks over.
8
The image shows the correct position of the
mounting and the rubber shim around the roof
trim strip.
─ Reinstall the covers and lock them securely
using the wrench.