English - Zyxel X6004 Manual Del Usuario

Introduction
A PBX is a telephone exchange device located at your company which sets up and
controls PSTN and ISDN calls. An IP PBX can also set up and control VoIP calls using the
Internet Protocol. This document covers configuring the X6004 for internal calls and
outbound calls to either the PSTN (Public Switched Telephone Network), ISDN (Integrated
Services Digital Network) or your ITSP (Internet Telephony Service Provider).
This Quick Start Guide consists of the following sections:
Hardware
- page 4
Configuration
- page 10
1 Installation
2 Extension Slots
digital phones and direct connections to the PSTN, ISDN or a traditional
PBX.
3 Hardware Connections
4 Web Configurator Login
5 Network Setup Wizard
6 Setting up Extensions
extensions for internal communications. An authority group manages
telephone extensions.
7 Create an Outbound Rule
authority group to them. These rules specify which outbound trunk should
be used for outgoing calls.
8 Outbound Groups (External Links)
in outbound rules.
9 IP Phone Registration and Making Calls
telephone calls.

ENGLISH

ENGLISH
Internet
PSTN
- install a voice interface card for connecting analog or
- create an authority group and create
- create outbound rules and associate an
3
ITSP
/
ISDN
- configure the external links used
- register IP phones and make