Zyxel X6004 Manual Del Usuario página 20

You must have the FXO/PRI/BRI interface card(s) already installed on the
X6004 to create a direct connection to corresponding network(s) (see
section 2).
8.1 FXO Trunk
1 Select FXO Trunk (PSTN).
2 Machine ID - Leave this field at its
default. This preconfigured name
identifies the X6004.
3 Group Name and Description -
Name this connection. Use
alphanumeric characters; spaces are
not allowed. The Description is
optional.
4 Available Trunk > Used Trunk -
Highlight the FXO port associated
with this PSTN connection and click
the right arrow to move it to the Used
Trunk column.
5 Click Create.
After creating your external connection,
you can continue with step
ENGLISH
4 on page 18.
20
1
2
3
4
5