Waking up to music (continued)
Tip
If you made a mistake,
press CANCEL. The
setting entered last will
be cleared. Re-enter it.
Tips
• To exit the standby
mode, press STANDBY
to make the t
indication disappear.
• The preset settings
remain until you reset
them.
• The display window
does not light while the
waking up timer is on.
30
EN
The Timer
4
Set the timer to the hour and the minutes you want
the music to go on.
1 Press =
or +
to set the hour and
press DISPLAY
ENTER MEMORY.
2 Press =
or +
DISPLAY ENTER MEMORY.
5
Set the timer to the hour and the minutes you want
the music to go off (Do as step 4.).
6
Press =
or +
press DISPLAY ENTER MEMORY.
7
Press STANDBY.
The t indication lights up and the power goes off;
the player enters the standby mode.
At the preset time, the power will go on and music
will play. Then the power will go off at the preset
time, and the player will enter the standby mode
again.
To check/change the waking up timer settings
Press TIMER, then DISPLAY ENTER MEMORY. Each
time you press DISPLAY ENTER MEMORY, a stored
setting is displayed in the set order. To change the
setting, display the setting you want to change and re-
enter it.
To use the player before a timer playback starts
If you turn on the player, you can use it as usual ( in
case of the radio, if you listen to the station which is
different from the one you tuned in step 1 on page 29,
you will hear that station at the preset time.) Turn off
the player before the preset time.
To stop play
Turn off the power.
to set the minutes, and press
to set the volume you want, and