Symbols Used In The Instruction Manual; Safety Information; General Safety Instructions; General Safety Instructions For Power Tools - Grizzly KSHS 710-500 Traducción Del Manual De Instrucciones Original

GB
Symbols used in the instructi-
on manual
Hazard symbol with information
on the prevention of personal
injury or property damage.
Hazard symbol with information
on the prevention of personal
injury caused by electric shock.
Always remove the mains plug be-
fore working on the device.
Wear cut-resistant work gloves.
Hazard symbol with information on
damage prevention.
Advisory symbol with information
on how to best use the device.

Safety information

This section describes the basic safety
rules when working with the device.

General safety instructions

Before working with the device,
familiarise yourself with all the con-
trols. Practise handling the device
and have the functionality, mode
of action and working techniques
explained to you by an experien-
ced user or an expert. Make sure
that you are able to switch off the
device immediately in case of an
emergency. Improper use of the
device can cause severe injury.
124
In the event of an accident or malfunction
during operation, switch off the device
immediately and pull out the mains plug.
Injuries must be properly treated or me-
dical assistance sought. Read the "Trou-
bleshooting" section to correct any mal-
functions or contact our Service Centre.
General Safety Instructions
for Power Tools
WARNING! Read all safety inst-
ructions and guidelines carefully.
Failure to follow the safety instruc-
tions and guidelines may result in
electric shock, fire and/or serious
injuries.
Save all safety instructions and guide-
lines for the future�
The term „power tool" used in the safety
instructions refers to mains-operated
electric tools (with a mains cable) and to
battery-operated electric tools (without a
mains cable).
Occupational safety:
• Keep your work area tidy and well
lit� Working in areas that are untidy or
without lighting can result in accidents.
• Do not work with the power tool in
a potentially explosive atmosphere
where flammable liquids, gases or
dust are present.
Power tools generate sparks that can
ignite dust or vapours.
• Keep children and other persons
away from the area while the power
tool is in use� Distractions can cause
you to lose control of the device.