Technoline WT475 Manual De Instrucciones página 14

The status "OFF" will be shown on the display as this is the
2.
default setting. Press the UP or DOWN button to set night
mode status to "ON" (activated) or "OFF" (deactivated).
Once set to "ON" the background LED automatically lowers
3.
the luminance during the set night mode period. The default
setting of night mode period is 18:00 to 6:00.
NIGHT MODE SETTING
Enter night mode display and set status of night mode to "ON".
1.
While "ON" is displayed, hold the MODE button for 2 seconds
2.
and the night mode starting hour digits flash. Press the UP or
DOWN button to set the hours.
3. Press the MODE button once again and the night mode
starting minute digits flash. Press the UP or DOWN button to
set the minutes.
4. Press the MODE button once again and the night mode ending
hour digits flash. Press the UP or DOWN button to set the
hours.
5. Press the MODE button once again and the night mode ending
minute digits flash. Press the UP or DOWN button to set the
minutes.
6. Press the MODE button to return to night mode display or it will
return to time display mode in around 10 seconds if no further
buttons are pressed.
Note:
Hold the UP or DOWN button to speed up the setting.
TROUBLE SHOOTING
If your clock displays irrelevant time or does not function properly,
which maybe caused by electro-static discharge or other
interference, unplug the DC jack to disconnect the AC power (and
remove the backup battery). The clock will be reset to default
settings and you need to set it again.
EN6