Operating Mode; Maintenance Instructions - Desoutter 6153988870 Manual De Instrucciones

6159921140_07
Original instructions.
© Copyright 2017, Desoutter HP2 7SJ UK
All rights reserved. Any unauthorized use
or copying of the contents or part thereof
is prohibited. This applies in particular to
trademarks, model denominations, part numbers
and drawings. Use only authorized parts. Any
damage or malfunction caused by the use of
unauthorised parts is not covered by Warranty or
Product Liability.
STATEMENT OF USE
This product is designed to be used as a module
installed on Desoutter SDP, SCBP and E-LIT
pistol screwdrivers, for installing temporary
fasteners.
No other use permitted.
For professional use only.
Tools equipped with module are CE Directives
compliant, exactly as declared in the CE
declaration of each screwdriver.
INSTALLATION
● See page 6.
A SDP
● Replace the standard clutch case 465463 by
the clutch case module 465493 as shown on
the drawing.
● Remove the thread protector 467103.
● Mount the driver in the bit holder.
● Tighten the kit front nose as shown on the
drawing.
Caution
● Use the 2 holes on the retainer for
pin spanner
B SCBP
● Replace the standard clutch case
2050479891 by the clutch case module
462203 as shown on the drawing.
● Remove the thread protector 458903.
● Mount the driver in the bit holder.
● Tighten the kit front nose as shown on the
drawing.
Caution
● Use the 2 holes on the retainer for
pin spanner
E-LIT pistol
C
● Remove the nose ring (part number
6155732170), the torque ring and the
overmoulding of the bit holder from the tool.
● Mount the adapter as shown on the drawing.
● Tighten the 5 screws as shown on the
drawing.
Caution
● Do not put the screws in front of the
tool LEDs.
● Mount the driver in the bit holder.
● Tighten the kit front nose as shown on the
drawing.
Caution
● Use the 2 holes on the retainer for
pin spanner

OPERATING MODE

Danger
Risk of crushing hands
● Do not put your fingers into the front
nose.
● For any information relating to the use and
maintenance of the tool, refer to the manual
delivered with the tool or available at http://
resource-center.desouttertools.com.
Manual
SDP
SCBP
E-LIT pistol

MAINTENANCE INSTRUCTIONS

Maintenance should be performed by qualified
personnel only.
● Prior to any maintenance task:
- disconnect the tool.
Overhaul and preventive maintenance
is recommended at regular intervals
once per year or after maximum 300,000
tightenings depending on which occurs
sooner.
Assembly and disassembly
● Follow standard engineering practices and
refer to figures/exploded view for the mounting
of component subassemblies.
10 / 48
Part number
474233
478013
6159933730
English
05/2017