Tabla de contenido
Idiomas disponibles
Idiomas disponibles
ENGLISH
Guidance for this procedure is found on the sharpener
package. For this purpose we recommend the purchase of
BLACK+DECKER saw chain sharpening kit A6039 (available
from BLACK+DECKER service agents and selected dealers).
Replacing worn out saw chains
Replacement saw chains are available through retailers or
BLACK+DECKER service agents. Always use genuine spare
parts.
Saw chain sharpness
The saw chain cutters will blunt immediately if they touch the
ground or a nail while cutting.
Saw chain tension
Regularly check the saw chain tension.
What to do if your chainsaw needs repair
Your tool is in accordance with the relevant safety
requirements. Repairs should only be carried out by a
qualified person using original spare parts otherwise this may
result in considerable danger to the user. We recommend you
keep this user manual in a safe place.
Storage
When the tool will not be used for several months, wipe
any metal components with oil. Ideally, leave the battery (6)
connected to the charger.
Proceed as follows:
Fully charge the battery (6).
u
Remove the battery (6) from the tool.
u
Store the tool and battery (6) in a secure and dry location.
u
The storage temperature must always remain in the range
of +5°C to +40°C. Place the battery (6) on a level surface.
Before using the tool after prolonged storage, fully charge
u
the battery (6) again.
Protecting the environment
Separate collection. Products and batteries
marked with this symbol must not be disposed
of with normal household waste.
Products and batteries contain materials that can be
recovered or recycled, reducing demand for raw materials.
Please recycle electrical products and batteries according
to local provisions. Further information is available at
www.2helpU.com.
10
(Original instructions)
Technical data
Voltage
V
DC
Chain speed (No-load)
min
-1
Maximum diameter of cut
mm
Weight
kg
Battery
Voltage
V
DC
Capacity
Ah
Type
Charger
Input Voltage
V
AC
Output Voltage
V
dc
Output Current
mA
Approx. charge time
h
Guaranteed sound pressure level measured according to EN60745:
LpA (sound pressure) 85 dB(A), uncertainty (K) 3 dB(A)
LwA (sound power) 95 dB(A), uncertainty (K) 2.3 dB(A)
LwA (guaranteed sound power) 97 dB(A)
Vibration total values (triax vector sum) according to EN 60745:
Cutting freshly felled softwood (a
EC declaration of conformity
MACHINERY DIRECTIVE
OUTDOOR NOISE DIRECTIVE
BDALLI18 – Alligator™ Lopper
Black & Decker declares that these products described under
"technical data" are in compliance with:
EN 60745-1:2009 +A11:2010
These products also comply with Directive
2006/42/EC, 2014/30/EU and 2011/65/EU.
For more information, please contact Black & Decker at the
following address or refer to the back of the manual.
The undersigned is responsible for compilation of the technical
file and makes this declaration on behalf of
Black & Decker.
Black & Decker Europe, 210 Bath Road, Slough,
BDALLI18
BL2018
906349** TYPE 1
200–240
)= 4.9 m/s², uncertainty (K) = 1.5 m/s²
h
R. Laverick
Engineering Director
Berkshire, SL1 3YD
United Kingdom
04/09/2018
18
1.9
100
3.1
18
2.0
Li-Ion
8–20
1000
2
Tabla de contenido
