Tabla de contenido
Idiomas disponibles
Idiomas disponibles
Direct Audio Input
The sound processor has a DAI (Direct Audio Input)
port that is used to connect external audio sources,
such as MP3 players (requires the use of the
optional Cochlear Baha Audio adapter), Bluetooth
devices, and the optional Cochlear Baha Telecoil
directly to your sound processor.
Match the accessory connector
1
with the sound processor's DAI
connector.
Holding the sound processor
2
1
gently at the corners, carefully
push the accessory connector
into the DAI port.
2
Also applicable to BP110 Power
16
Dedicated DAI program and
microphone mixing
An optional DAI program that is set by your hearing
care professional allows you to listen exclusively to
sounds from the DAI.
In all other programs, input from the DAI is
combined with input from the microphone.
Using the telecoil
The telecoil unit improves sound when using some
landline (fixed) and mobile telephones. It also gives
you access to loop facilities in homes and public
buildings. Attach the telecoil to the DAI port.
Using the Audio adapter
The Audio adapter allows direct input from
computers, personal stereos, TVs, MP3 players
and other external audio equipment. One end
of the Audio adapter is connected to the sound
processor at the DAI. The other end is connected
to the audio device.
Warning: Connecting electrical equipment
directly to the sound processor is extremely
dangerous. Cochlear is not liable for any damage
arising as a result of connecting incorrect
equipment or incorrect use.
Using an FM receiver
An FM receiver enables the use of FM systems
that are commonly used in school classrooms.
Your hearing care professional can let you know
what FM receivers are available. Attach your FM
receiver to the DAI port.
English
Also applicable to BP110 Power
17
Tabla de contenido
