Tabla de contenido
Idiomas disponibles
Idiomas disponibles
Adjusting volume and setting the Keylock
Adjusting volume
Your hearing care professional has set the volume
level for your sound processor. You are also able to
manually adjust the volume control.
To control your listening comfort in different
listening environments, you can adjust the volume:
1
For sound processor on right side, press the
front button to increase volume. Press the back
button to decrease volume.
For sound processor on left side, press the
2
front button to decrease volume. Press the back
button to increase volume.
A beep sounds each time a volume button is
pressed. When you reach your default volume,
2 short flashes/beeps occur. When you reach the
minimum or maximum volume level, a long flash/
beep occurs.
12
–
+
–
+
–
+
1
2
BP100
–
+
–
+
1
2
BP110 Power
Keylock
Keylock protects program and volume level settings
and ensures they cannot be changed inadvertently.
To activate Keylock, press and hold both volume
•
buttons for 5 seconds
1
. The blue visual indicator
flashes to show that Keylock is activated
2
.
To disable Keylock, press and hold both volume
•
buttons for 5 seconds
. The orange visual indicator
1
flashes to show that Keylock is disabled
3
.
Note: Keylock remains in effect even when the
battery is removed. When Keylock is enabled,
the visual indicator will flash 6 times when the
processor is turned on.
Note: Do not press and hold all three buttons at
the same time. This will put the sound processor
into a temporary programming mode with flashing
indicators, and is not suitable for listening.
Note: If both indicators flash - stop. Take out and reinsert the battery.
Retry and make sure to press only the two volume buttons.
English
1
1
2
2
3
3
BP100
BP110 Power
13
Tabla de contenido
