Kilsen KL710 Guia De Inicio Rapido

KL710 and KL731 Conventional Point Detector
Installation Sheet
EN DE ES FR HU IT
1
3
EN: Installation Sheet
Installation
Caution: For general guidelines on system planning, design,
installation, commissioning, use, and maintenance, refer to the
EN 54-14 standard and local regulations.
To install a detector
Caution: Always recalibrate optical smoke detectors before
first-time installation.
© 2015 UTC Fire & Security. All rights reserved.
NL PL PT TR
2
1. Insert the detector head into the mounting base and rotate
it clockwise until it clicks into place (Figure 1).
2. The detector may be locked into the mounting base if
required. To do this, remove the locking tab before
installation (Figure 2).
3. Always test detectors after installation.
To remove a locked detector:
1. Insert a small screwdriver into the locking tab slot
(Figure 3).
2. Press and rotate the detector anticlockwise.
1 / 12 P/N 10-4221-501-KL7C-01 • ISS 30MAR15