Care And Cleaning - Kenwood KM240 Serie Manual De Instrucciones

to fit and use the splashguard
1 Fit the bowl into the base and add the ingredients.
2 Fit the tool then lower the mixer head
3 Fit the splashguard onto the bowl by sliding the cut
away section around the mixer head
4 To remove the splashguard reverse the above
procedure.
During mixing, ingredients can be added directly to
G
the bowl via the chute.

care and cleaning

Always switch off and unplug before cleaning.
G
power unit
Wipe with a damp cloth, then dry.
G
Never use abrasives or immerse in water.
G
bowl, tools, splashguard, removable guard
on dough hook
Wash by hand, then dry thoroughly or wash in the
G
dishwasher.
Never use a wire brush, steel wool or bleach to clean
G
your stainless steel bowl. Use vinegar to remove
limescale.
Keep away from heat (cooker tops, ovens,
G
microwaves).
Blenders AT282 and AT283
(if supplied)
Use the blender for soups, drinks, pâtés, mayonnaise,
breadcrumbs, biscuit crumbs, chopping nuts and
.
crushing ice.
safety
SCALD RISK: Hot ingredients should be allowed to
G
cool to room temperature before blending.
Don't touch the sharp blades. Keep the blade unit
G
away from children.
Only use the goblet with the blade unit supplied.
G
Never attempt to fit the blade unit to the machine
G
without the goblet fitted.
Always unplug the machine before putting your hands
G
or utensils in the goblet.
Never run the blender empty.
G
Only operate the blender with the lid in place.
G
Never fit the blade unit to the power unit
G
without the blender goblet fitted.
Always take care when handling the blade assembly
G
and avoid touching the cutting edge of the blades
when cleaning.
When removing the blender from the power unit:
G
G G
G G
G G
Misuse of your blender can result in injury.
G
important
The skirt on the bottom of the AT282 acrylic
goblet is fitted during manufacture and no
attempt should be made to remove it.
The attachment will not operate if it is
G
incorrectly assembled or incorrectly fitted
to the kitchen machine or if the medium
speed outlet cover is not fitted.
Never run the blender for longer than one minute - it
G
will overheat. Switch off as soon as you have the right
consistency.
Don't put dry ingredients into the blender before
G
switching on. Cut them into cubes, then remove the
filler cap and drop the cubes through the hole in the
lid whilst the machine is running.
model AT282 don't process spices such as cloves,
G
dill and cumin seeds - they damage the acrylic.
Don't use the blender as a storage container. Keep it
G
empty before and after use.
Never crush ice on its own, always add a little water.
G
model AT282 never blend more than 1.5 litres (2
G
pints 12fl oz) - less for frothy liquids like milk shakes.
5
switch off;
wait until the blades have completely stopped;
model AT283 care should be taken not to
unscrew the goblet from the base assembly