Factory Default Settings - Motorola CLP Serie Manual Del Usuario

2. Make sure the radio is turned ON.
3. Once the radio is connected, open the CPS and
select "Read" on the toolbar to get the radio
profile. The CPS allows the user to change
settings, such as General, Audio, Menu,
Channels, Scan List, Customised PL/DPL,
Bluetooth (*) as well as select frequencies,
PL/DPL codes on each channel.
4. After you change the settings, press "Write"
on the toolbar to save the settings.
(*) 39 standard CTCSS, 6 customised CTCSS, 84 standard DCS and 6 customised DCS codes
20
English
CLP0086BHLAA (wired) and CLP0086BBLAA (Bluetooth)
Channel # Frequency Setting
1 446.00625
2 446.01875
3 446.03125
4 446.04375
5 446.05625
6 446.06875
7 446.08125
8 446.09375
For more information on the Computer Programming
Software, please refer to Help menu on the CPS.
Note: (*) CPS Programming Cable (P/N
HKKN4025) is an accessory sold
separately. Please contact your Motorola
Point of Purchase for more information.
Note: (*) Bluetooth is available on selected
models only.

Factory Default Settings

Your radio is programmed at the factory to the
following settings:
Sub-Codes Operating Frequency (MHz)
219 (*) 446.00625 – 446.09375
219 (*) 446.00625 – 446.09375
219 (*) 446.00625 – 446.09375
219 (*) 446.00625 – 446.09375
219 (*) 446.00625 – 446.09375
219 (*) 446.00625 – 446.09375
219 (*) 446.00625 – 446.09375
219 (*) 446.00625 – 446.09375