DeWalt DWST1-81078-QW Manual Del Usuario página 33

ON SCREEN BATTERY STATUS POPUP
When charging a battery pack, a large battery image is displayed in the center of the LCD
screen showing the battery pack charging status.
Green
Yellow
Red
Cyan and Red
WARNING: To reduce the risk of injury, turn the appliance off and disconnect it from the
power outlet when not in use and when making repairs. Do not attempt to disassemble the
unit; take it to an authorized service center when service or repair is required.
SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE
The full user manual is available on www.2Helpu.Com/DEWALT
Battery pack is fully charged
Battery pack is partially charged
Battery pack is empty
Hot/Cold Delay
This charger has a hot/cold delay feature:
when the charger detects a battery that
is hot, it automatically starts a delay,
suspending charging until the battery has
cooled. After the battery has cooled down,
the charger automatically switches to the
pack charging mode. This feature ensures
maximum battery life.
Faulty Battery Packs
This charger will not charge a faulty battery
pack. The charger will indicate faulty battery
pack by displaying an X on the LCD battery
image. If this occurs, re-insert the battery
pack into the charger. If the problem persists,
try a different battery pack to determine if the
charger is working properly. If the new pack
charges correctly, then the original pack is
defective and should be returned to a service
center or other collection site for recycling. If
the new battery pack elicits the same trouble
indication as the original, have the charger
and the battery pack tested at an authorized
service center.
NOTE: This could also mean a problem with
a charger.
EN EN
33