Sony HT-IS100 Manual De Instrucciones página 69

4
x/X
Press repeatedly until "S-AIR SET"
appears, then press
5
x/X
Press repeatedly until "PAIRING"
appears, then press
6
x/X
Press repeatedly to select the
desired setting, then press
• START: the subwoofer starts
pairing.
• CONDITION: you can check the current
ID. When the pairing
setting is not made, "NO
PAIRING" appears in the
top panel display.
7
Start pairing of the S-AIR product.
To start paring of the S-AIR product, refer
to the operating instructions of the S-AIR
product.
When sound transmission is established,
"COMPLETE" appears in the top panel
display.
8
Press AMP MENU.
The AMP menu turns off.
Note
• Perform the pairing of the S-AIR product within
several minutes after step 6. If you do not, pairing is
canceled automatically and the "INCOMPLETE"
appears in the top panel display.
To cancel pairing
Perform the ID setting of the subwoofer
according to the procedure of "To set the ID of
the subwoofer" (page 67). If you select a new ID
(you can select the same ID as before), pairing is
canceled.
Enjoying the system's sound
or c.
by using the S-AIR product
or c.
You can enjoy the system's sound by using the
S-AIR product that is compatible with the S-AIR
mode. The S-AIR product can be installed
or c.
anywhere, regardless of the location of the
subwoofer, for enjoying the system's sound in
another room.
For details of the S-AIR product, refer to the
operating instructions of the S-AIR product.
Note
• Sources with copyright protection may not be
playable on S-AIR products.
1
Notes
• When you are using another S-AIR product, do not
change the ID of the subwoofer. Set the ID of the
S-AIR product to the same ID as the subwoofer.
• When you pair the subwoofer and another S-AIR
product by the pairing operation, you need to perform
pairing between the subwoofer and the S-AIR
product. For details, see "To perform the pairing
operation" (page 68).
Set the ID of the S-AIR product to that of
the subwoofer.
To set the ID of the subwoofer, see "To set
the ID of the subwoofer" (page 67).
continued
69
US