Sony HT-IS100 Manual De Instrucciones página 44

Using the Volume Limit
function
When the System Audio Control function is
active, and the output method changes from the
TV speaker to the system speaker automatically,
loud sound may be output depending on the
volume level of the system. You can prevent this
by limiting the maximum volume level.
1
Press AMP MENU.
2
x/X
Press repeatedly until "SET HDMI"
appears, then press
3
x/X
Press repeatedly until "VOL LIMIT"
appears, then press
4
x/X
Press to select the maximum
volume level you want.
The maximum volume level changes as
follows:
MAX y 49 y 48 y
...... y 2 y 1 y MIN
5
Press AMP MENU.
The AMP menu turns off.
Notes
• This function is available only when the Control for
HDMI function is set to on.
• This function is not available when the output method
changes from the system speaker to the TV speaker.
Tips
• Sony recommends that you set the maximum volume
level to a little lower than the volume you usually
listen to.
• Regardless of the maximum volume level you set, the
VOLUME +/– button of the subwoofer and the
MASTER VOL +/– button of the remote are operable.
• If you do not want to limit the maximum volume
level, select "MAX."
44
US
or c.
or c.
Using the input buttons of the
remote
The input buttons (TV (white), BD, DVD, SAT,
VIDEO, DMPORT) work as follows when the
Control for HDMI function is set to on.
• BD, DVD, SAT, VIDEO, DMPORT: Since the
input of the TV is also switched automatically,
you can watch the image of the selected
component on the TV simply by pressing the
buttons.
• TV: The input of the TV switches
automatically. When you connect a Sony TV,
you can watch the TV simply by pressing the
button.
Tip
• You can control connected Sony components by
pressing the input buttons. For details, see
"Controlling the Connected Sony Components with
the Remote" (page 50).