Start Measuring; First Measurement - Gima 27088 Manual De Instrucciones

4. Setting Age
• After confirming Stature, the system will divert to Age setting.
• As pictured below, the digits "30" blinks. The operator may press the function
key  or  to increase or decrease the numeral.
• You may press and hold the function key  or  for fast changing the numer-
al.
• Press "SET" key to confirm Age.
5. After confirming the Age, the LCD will display "0.0", then you can start measur-
ing.
6. Repeat procedure for a second user, or to change user details.
Note: To update or overwrite the memorised data, follow the same procedure,
making changes as required.

START MEASURING

First Measurement

• Position scale on a firm flat surface.
• Press SET key.
• While the user number of the latest measurement is flashing, select your user number by pressing 
or  key. After 3s, the selected number is locked, the scale shows zero reading.
(Note: When the user number is flashing, if you press SET key again, it will enter the setting mode,
after all the settings are finished, it will display zero reading. )
STEP 1: Step on the platform barefooted when the LCD displays
"0.0".
STEP 2: Stand still and the weight data will be locked automatically with showing the unit when stable.
Keep full contact with the electrodes until the LCD stop displaying moving "
STEP 3: Your weight will be displayed followed by Body Fat, Total Body Water, Muscle Mass ,and
Bone Mass. The data will be displayed three times and then turn off.
ENGLISH
".
22