Package Contents; Preparation - Utilitech 0003139 Manual De Instrucciones

pAcKAGe coNteNtS

pArt DeScriptioN
A

prepArAtioN

Before beginning assembly of product, make sure all parts are present. Compare parts with package
contents list and hardware contents above. If any part is missing or damaged, do not attempt to
assemble the product. Contact customer service for replacement parts.
estimated Assembly time: 5 minutes
No tools required for assembly.
Knowing the Depth of your Well
Shallow wells are less than 25 ft. to water; deep wells are up to 90 ft. to water. Tie a small but heavy
weight to the end of a piece of string (be sure there is enough string; some wells are very deep).
Lower the weight into the well until it reaches the bottom. Take up the slack and mark the string at
ground level. Pull the weight out of the well and measure from the bottom of the weight to the ground
level mark. This is the depth of your well. Subtract 5 ft. from the depth of the well. This number should
not exceed the maximum rated depth for the pump. If it does, it will greatly hinder or prevent the
proper operation of the pump.
A
QuANtity
Pump 1
6