Adding/Deleting Rts Sensors - SOMFY Sonesse 30 RTS Manual De Usuario

Sonesse 30 RTS
3.8.2.Adding/Deleting Somfy control points
NOTICE
Orange LED blinks slowly when adding or
deleting a remote control.
3.8.2.1.Using a control point already programmed to the motorised
product
1] Press and hold the Prog. button (A) on the
programmed control point until the
motorised product briefly moves up and
down.
ð Green LED blinks 5 times then orange
LED blinks slowly.
2] Briefly press the Prog. button (B) on the
control point to add or delete.
g Green LED blinks 5 times.
3.8.2.2.Using the Programming button on the drive head
1] Press and
programming button until the motorised
product briefly moves up and down.
2] Briefly press the Prog. button (B) on the
control point to add or delete.
g Green LED blinks 5 times.

3.8.3.Adding/Deleting RTS sensors

NOTICE
Orange LED blinks slowly when adding or
deleting an RTS sensor.
©
Copyright 2020 SOMFY ACTIVITES SA. All rights reserved.
hold the drive
1]
A
PROG.
head
1]
C
EN
2]
B
PROG.
2]
B
PROG.
C C
25