Parameter Setting; Adding/Deleting Rts And Rt Control Points; Adding/Deleting Rts Sensors; Setting Intermediate Positions - SOMFY LT 50 CSI RTS Guia De Instalacion

LT 50 CSI

5. PARAMETER SETTING

5.1 Adding/Deleting RTS and RT control points

5.1.1 RTS control point
- Find an RTS control point programmed in the motor.
- Press and hold the RTS programmed control point PROG
button until the motor moves for a few seconds: the motor
is in programming mode.
- Quickly press the RTS control point PROG button to add
or delete: the motor moves for a few seconds and the RTS
control point is programmed or deleted from the motor.
5.1.2 Inis RT/Inis RTS control point
- Find an RTS control point programmed in the motor.
- Press and hold the RTS programmed control point PROG
button until the motor moves for a few seconds: the motor
is in programming mode.
- Form a contact between the metal PROG plate and the
battery mounting for the Inis RT/Inis RTS: the motor moves
for a few seconds and the Inis RT/Inis RTS control point is
programmed or deleted from the motor.

5.2 Adding/Deleting RTS sensors

- Find an RTS control point programmed in the motor.
- Press and hold the RTS programmed control point PROG
button until the motor moves for a few seconds: the motor
is in programming mode.
- Quickly press the RTS sensor PROG button to add or
delete: the motor moves for a few seconds and the RTS
sensor is programmed or deleted from the motor.

5.3 Setting intermediate positions

5.3.1 Definition
The LT 50 CSI RTS motor allows two intermediate positions of the roller shutter/awning to be defined and
programmed:
- one upper intermediate position, called IP1, accessible when the roller shutter/awning is in the raised
position,
- one lower intermediate position, called IP2, accessible when the roller shutter/awning is in the lowered
position,
If the roller shutter/awning has not been moved for more than 3 minutes, a single press on the STOP/MY
button will access movement in the intermediate position. If the roller shutter/awning has been moved less
than 3 minutes previously, the STOP/MY button must be pressed twice in succession to access movement
in the intermediate position.
Copyright © 2007-2020 SOMFY ACTIVITÉS SA, Société Anonyme. All rights reserved.
EN
19