Compatible Power Supplies (For Us Only) - SOMFY Sonesse 30 RTS Manual De Usuario

EN
2.1.5.Installing the drive-tube assembly
CAUTION
• The motorised product must not be compressed between the brackets.
• Do not use the plastic cross without the metal bracket adapter.
▪ The drive can be fixed directly onto the drive bracket (the screw holes are
spaced 29 mm apart). Use 2 screws (3.5 x 9 mm). A manual tightening torque of
1.5 N m is recommended.
▪ Or the drive can be fixed with an integrated
drive plate (check in the catalogue to find
the reference which fits perfectly with your
bracket). Use the 2 screws (3 x 6 mm)
delivered with the motor plate. A manual
tightening torque of 0,9 N m is
recommended. This solution improves the
light gap.
1] Screw the bracket adapter to the drive
head.
2] Install and fix the drive-tube assembly
onto the end bracket (c) and onto the
drive bracket (d).
CAUTION
• Ensure that the drive-tube assembly is secured onto the end bracket. This
operation prevents the tube-drive assembly from coming out of the end
bracket attachment.
• Light gap reduced: Do not pinch cable or be careful they are not in contact
with moving parts.

2.2.Compatible power supplies (for US only)

References
1870196
1870192
8
Designations
5 motors / Somfy Control Distribution panel
10 motors / Somfy Control Distribution panel
©
Copyright 2020 SOMFY ACTIVITES SA. All rights reserved.
Sonesse 30 RTS
d
c