Emmaljunga NXT 90 Instrucciones página 27

Go Double Adaptor
(1)Attaching the Go Double Adapter to the chassis
1.1 Unfold the chassis according to the NXT90 manual.
1.2 Attach the Go Double Adapter on the chassis according to the picture.
Please note the safety lock must be inserted under the chassis bar to attach
the adapter.
1.3.Place and align the Go Double Adapter on top of the chassis and the
front chassis bar and check that the front support in Go Double is positioned
over the front wheel assembly on the chassis.
1.4/5 Push the adapter so that the front clamp and the body of the adapter
clicks in to the chassis bar at the same time.
1.6 Ensure the clamp is securely fastened on the Go Double Adaptor
1.7 When in place push the front of the Go Double Adaptor towards the
chassis.
1.8 Correctly attached.
(2) Using seat units
2.1 WARNING: Note that the pram's stability is immediately affected if you
change the weight distribution on the Go Double. Be aware that the risk of
tipping increases as soon as you attach/remove seat units, carrycots, car seats
or place children in/remove children from the pram.
Attach the first seat unit to Go Double in the lower bracket
2.2 The seat unit footrest should be placed in the shopping cart.
2.3 On the Go Double Adapter you can use the seat units first and second
upper position. The picture shows the upper position which is the loading
position. (loading and unloading position)
2.4 The upper position is the position for use.
2.5 Then push (1) safety locking knob.
2.6 Then turn the safety locking knob anti-clockwise to its locked position.
2.7 The arrows on the green area must be aligned.
WARNING It is important that the safety locking knob is in place and in the
locked position. Risk of injury and tipping hazard can arise from misuse.
27
NXT90 Go Double Adaptor v 1.4