Bluetooth Mode; Starting Bluetooth Mode; Registering Bluetooth Devices; Telephone Mode - Bluetooth - Blaupunkt New York 835 W Manual De Instrucciones

Bluetooth mode

Bluetooth mode
The Bluetooth® function allows registering cell phones
and media playback devices with the New York.
When you register a cell phone with the New York, you
can make phone calls with the built-in hands-free func-
tion. You can access the lists of dialled numbers and the
phone book of the registered cell phone.
If the connected Bluetooth® device supports the func-
tions A2DP and AVRCP, you can play the music via the
New York unit and control the playback. During a call, the
music playback is interrupted and continued again after
the call.
If a cell phone is registered via Bluetooth® and a call is re-
ceived during the playback of another source, the source
playback is interrupted and the call menu is displayed.

Starting Bluetooth mode

u In the main menu, press on Bluetooth.
- Or -
u Press the MENU button
(Prerequisite: This function is assigned to the button
in the settings menu.)
The Bluetooth® menu is displayed. It contains the list
of known Bluetooth® devices. Other audio sources
are switched off .
[ ] Change to next higher level.
[ ] Move selection mark.
[ ] Move selection mark.
[ ] Disconnect connection to marked device.
[ ] Delete marked device from the list.
[ ] Display options menu.
u Double-click on the name of the Bluetooth® device
with which you want to establish a connection.
When the device is in range, the connection is estab-
lished and the menu for the device is displayed.
38
2
for approx. 2 seconds.

Registering Bluetooth devices

If you want to register a device with the New York for the
fi rst time, proceed as follows:
u Ensure that Bluetooth® is activated at the New York
and at your Bluetooth® device.
u In the options menu of the Bluetooth® mode, enter a
pairing code (see Bluetooth® settings).
u Search for new devices/connections on your Blue-
tooth® device.
u The New York appears as "New York" in the list of
Bluetooth® devices.
u Establish the connection; you may have to enter the
pairing code that was previously defi ned on the New
York.
The connection is being established and the menu
for the registered device is displayed.
Note:
If a telephone is connected with the New York unit,
the Bluetooth® icon
edge of the display in all audio/video sources.

Telephone mode - Bluetooth

If you registered a phone with the New York via Blue-
tooth®, the following menu appears.
[ ] Change to next higher level.
[ ] Move selection mark.
[ ] Move selection mark.
[ ] Disconnect connection with current device.
[ ] Display keypad to directly enter a phone
number
[ ] Display options menu.
u Select a contact/number via the call lists or the phone
book and double the entry twice (double-click).
The connection is being established.
is displayed at the top right