Assembly; Joining The Monitor And The Control Unit - Sony BKM-37H Manual De Instrucciones

Cover (lower) (left) (1)
Joints (2)
Screws A (3 × 8) (12)
Screws B (4 × 8) (16)
Screws C (5 × 10) (4)
Screws D (4 × 12) (4)
Connecting cable (1)
18

Assembly

Assembly
Joining the Monitor and the Control
Unit
You can join a control unit to a monitor using the
attachment stand.
For monitors other than BVM-L/PVM-L series, see "For
other monitors" (page 21).
For BVM-L/PVM-L series monitors
1
Remove the five legs from the bottom of the control
unit.
Control unit
2
Attach the right stand and left stand to the sides of the
control unit using four screws B (4 × 8).
Use two screws B for each stand.
Right stand
Left stand
Screw B