Precautions; Overview; Features - Sony BKM-37H Manual De Instrucciones

Precautions

• When you assemble the attachment stand, turn off the
monitor power before unplugging the cable. If you attach
the attachment stand with the monitor power on, the
cable may become trapped between the monitor and the
attachment stand and this may lead to electric shock.
• Join the monitor and the control unit with the help of
another person to avoid injury.
• Install the attachment stand on a steady table. If the
attachment stand is installed on a wobbly or sloping
surface, the monitor may drop down and you may get
injured. Make sure that the installation location is
sufficiently strong.
• The use of other screws may lead to injury because they
may loosen or fall out.
• Do not attach the attachment stand to the units other than
those specified. If you do, the monitor may drop down
and you may get injured.
• When you tilt the monitor, hold the top and the bottom of
the monitor to avoid injury. If you do not hold the
monitor properly, the monitor may drop down and you
may trap your fingers in the attachment stand.
• Do not climb on the attachment stand or place anything
heavy on it, as this may cause you to fall and injure
yourself or the monitor to crash to the floor.
• Do not touch any sharp points of the attachment stand
with bare hands. When you unpack, carry, attach and
disassemble the attachment stand, wear protective gloves
to avoid injury.
• Put on the side covers so that you may not trap your
fingers in the movable parts.
• When you attach the attachment stand, be sure to secure
the tilting screws on both sides of the attachment stand.
If the tilting screws are not secured tightly, the monitor
may move suddenly and you may get injured.
16
Precautions / Overview

Overview

Note
This manual is described using the illustrations of a BVM-
L231 or BVM-E250.

Features

The BKM-37H Controller Attachment Stand is an
attachment stand for joining Sony 23 to 25-type business &
professional video monitors of the BVM/PVM series and a
Sony BKM-16R Monitor Control Unit.
Joining the monitor and the control unit
The BKM-37H joins the BVM/PVM series monitor and
the BKM-16R control unit. The attachment stand is also
usable as a tilt stand for the monitor even if the BKM-16R
is not attached.
Tilting the monitor
The BVM/PVM series monitor can tilt between 5° forward
and 10° backward when the attachment stand is attached.
Raising and lowering the height
Removal of the tilt unit pre-installed on the attachment
stand allows the installation height to be lowered.
For removing the tilt unit, see " Lowering the Height"
(page 23).