Sony BKM-37H Manual De Instrucciones página 20

7
Clamp the connecting cable to the cable holder on the
rear stay.
8
Attach the right upper cover and left upper cover to the
stands using two screws A (3 × 8) each.
20
Assembly
Screw A
Upper cover
9
Attach the right lower cover and left lower cover to the
stands using four screws A (3 × 8) each.
When the tilt unit is attached
Put the cover over the stand from above.
When the tilt unit is removed
First put the front of the cover over the stand, and then
fit the back of the cover while bending it outward.
Screw A
Lower cover
Screw A
Lower cover