A
Camera stand (1) /
Support de la caméra (1) /
Kameraständer (1)
PCS-STP1 PCS-STG1
1
B
1
2
3
TERMINAL
VISCA OUT
AUDIO OUT
AUX1–
VIDEO IN
–AUX2
AUDIO IN
CAMERA UNIT
MIC
(PLUG IN POWER)
ISDN UNIT
WHITE
1
2
BOARD
(MIXED)
VIDEO OUT
100BASE-TX
DC 19.5V
AUX
MAIN– MONITOR– SUB
10BASE-T
RGB OUT
DSB
IR OUT
1
2
4
Terminal base plate (1) /
Plateau de base du terminal (1) /
Terminalbasisplatte (1)
Screws (3) / Vis (3) / Schrauben (3)
Camera cable (1) /
Câble de la caméra (1) /
Kamerakabel (1)
2
Communication Terminal /
Terminal de communication /
Kommunikationsterminal
3
3
3
3
View from the bottom /
Vue d'en bas /
Unterseite
Camera Unit / Caméra /
Kameraeinheit
View from the bottom /
Vue d'en bas /
Unterseite
English
The PCS-STG1/PCS-STP1 is a camera stand designed
for use with the PCS-1 Video Communication System.
Assemble and attach it by following the instructions
given below.
Assembling the camera stand
Before assembly
Confirm that you have all of the required parts
• Camera stand (1)
• Terminal base plate (1)
• Screws (3)
• Camera cable (1)
1
Attach the terminal base plate to the camera stand.
Use the screws (3) supplied.
a
2
In case of natural disasters or earthquakes, attach a
metal safety bracket using a screw in screw hole
, and attach the stand securely to a wall using a
a
support wire, etc., to keep it from falling down.
WARNING
The metal safety bracket and wire are not supplied.
For proper advice on how to prevent the unit from
falling down, consult the dealer from whom you
purchased the unit, or the nearest Sony service
representative.
Attaching the Communication
Terminal and Camera Unit
1
Attach the Communication Terminal by aligning
and inserting the four rubber feet on the bottom in
the four hollows in the terminal base plate.
2
Attach the Camera Unit to the camera base plate
and secure it with screw built in camera base plate.
3
Connect the Communication Terminal and the
Camera Unit using the camera cable.
Use the camera cable supplied.
Note
Connect the jack marked "TERMINAL" on the
Communication Terminal with the jack marked
"CAMERA" on the Camera Unit.
A
B
