STORZ & BICKEL Crafry+ Modo De Empleo página 53

X If you want to clean the Cooling
Unit Cap in isopropyl alcohol, re-
move the cap lock by pulling it up
on one side.
The signet hologram on the cap
i
lock is a sticker.
X Unscrew the Cooling Unit Base
from the Vaporizer by turning it 90°
counterclockwise.
7 C L E A N I N G
X Lever out the large Base Seal Ring
with the Filling Chamber Tool at the
recess in the groove.
X Remove the small Base Seal Ring.
X Use the provided Filling Chamber
Tool to push the upper Screen from
top to bottom out of the Filling
Chamber Cap.
54