Cleaning; Cooling Unit; Product Overview; Disassembling - STORZ & BICKEL Crafry+ Modo De Empleo

7.1 Cooling Unit
Cooling Unit and Mouthpiece must
i
be free of deposits. These are
caused by steam condensate in-
side the Cooling Unit. For this rea-
son, please check the Cooling Unit
and Mouthpiece before each use.
Clean the Cooling Unit including
i
the mouthpiece regularly and
when used by more than one per-
son. Cleanliness is a prerequisite
for proper function.for proper func-
tion and taste.

7.1.1 Product Overview

1
2
3
4
5
6
7
8
1 Cap Lock
2 Mouthpiece
3 Mouthpiece Seal Ring
4 Cooling Unit Cap
5 Base Seal Ring (small)
6 Cooling Unit Base
7 Upper Screen (coarse mesh width)
8 Base Seal Ring (large)
7 C L E A N I N G

7.1.2 Disassembling

A heated Cooling Unit is easier to
i
disassemble because the steam
condensate can be sticky.
X Pull the cap lock towards the
Mouthpiece.
X Pull the Cooling Unit Cap from the
Vaporizer.
X Pull the Mouthpiece out of the
Cooling Unit Cap by tilting it slightly
back and forth.
X Remove the Mouthpiece Seal Ring.
53