Char-Griller Gravity 980 Instrucciones De Operación página 4

Using the Gravity 980 Controller
POWER
1. Ensure Controller Adapter is securely plugged in to GFCI outlet
2. Press Power Button to turn controller ON
3. Press and hold Power Button to turn Controller OFF
SET GRILL TEMPERATURE
1. Press Grill Temp Button
2. Adjust desired temperature target by rotating Control Knob (max 700°F)
3. Press Grill Temp Button again to set desired grill temperature target
SET MEAT PROBE TEMPERATURE
1. Insert Meat Probe Connector into Probe Jack (Controller can accommodate up to 2 meat probes)
2. Press Meat Probe Temp Button
3. Adjust desired internal meat temperature by rotating Control Knob (max 225°F)
4. Press Meat Probe Temp Button again to switch between meat temperature 1 and
meat temperature 2
5. Alarm will sound when internal temperature is reached (press any button to stop alarm)
SET TIMER
1. Press Timer Button
2. Adjust desired timer duration by rotating Control Knob (timer will change in 5-minute increments)
3. Press Timer Button to begin countdown
4. Alarm will sound when timer completes (press any button to stop alarm)
TURBO FAN
1. Press Turbo Fan Button for increased fan performance
NOTES
• Controller will automatically maintain your set temperature target for duration of cook
• Set temperature is a target and some fluctuation is normal. (+/-5%) Any significant fluctuation may
be the result of outside temperature, humidity, direct sunlight, fuel type used, rear damper not fully
open, lid being open, other doors not securely closed
• Hopper Lid and Ash Pan Door must be closed for controller to begin operation
• If desired, all settings can be updated after your cook has started