Allmatic BOOMY4 Manual Del Usuario página 60

9.8 BASE MENU
You can access a BASE MENU for modifying the main parameters of the control unit. To enter the menu, proceed as follows.
WARNING! - after 2 minutes of inactivity the control panel automatically exits the menu.
Example of access to the basic menu for modifying the tCL parameter.

UP DOWN
MENU
SS
Make sure you are out of the
programming menus (briefly
press the «MENU» button).

UP DOWN
MENU
SS
Use the "UP" or "DOWN"
keys to change the value.
PARAMETER
TCL
1 Automatic closing time (0 = disabled).
TTR
2 Closing time after transit (0 = disabled).
SEn
3 Sensitivity on obstacle at full speed (0 = disabled).
SEL
4
Sensitivity on obstacle at slowing speed (0 = disabled).
24 / 36 - English

UP DOWN
MENU
SS
> 2''
To enter the base menu,
press and hold the "MENU"
key for at least two seconds.
> 2'' - SAVE
< 2'' - NO SAVE
UP DOWN
MENU
SS
To save, press and hold the
"MENU" key for at least two
seconds.
To exit without saving briefly
press the "MENU" key.
DESCRIPTION

UP DOWN
MENU
SS
To scroll through the
functions, press the "UP" or
"DOWN" keys.

UP DOWN
MENU
SS
To scroll through the
functions, press the "UP" or
"DOWN" keys.
DEFAULT
CUSTOM

UP DOWN
MENU
SS
> 2''
To enter the parameter, press
the "MENU" button for at
least two seconds until the
value flashes.

UP DOWN
MENU
SS
To exit, briefly press the
"MENU" button.
MIN MAX
0 0 900
0 0 30
40 0 100
60
0
100
6-1622396 - rev. 3 - 21/09/2021
UM
s
s
%
%