Allmatic BOOMY4 Manual Del Usuario página 58

9.5 LEARNING OF TRANSMITTERS
The learning of a transmitter can be activated through the "UP" button of the control unit or through the hidden button of a transmit-
ter already stored.
The control panel BIOS1 24V BOOMY always associates to the button of the transmitter the function STEP-BY-STEP.
Make sure you are out of the programming menu.
1. To exit, briefly press the «MENU» button until you see the
status of the control panel.
Press and release the «UP» button. The sign rad appears
2.
on the display.
3. Within 10 seconds, press the transmitter button to learn.
If the storage was successful, the message don or fnd
4.
appears on display, if the transmitter was already stored.
After 2 seconds, the display shows the memory position
5.
where the remote control was stored (e.g., 235).
To store a new remote control, repeat the procedure from point 2.
WARNING! - After 10 seconds of inactivity the control panel exits the learning mode (the display shows tout).
22 / 36 - English
UP DOWN
MENU
SS
UP DOWN
MENU
SS

o




6-1622396 - rev. 3 - 21/09/2021