Installation - Allmatic Hyper 400 Manual Del Usuario

6. INSTALLATION

6.1 DETERMINE THE INSTALLATION MEASUREMENTS (OPENING INWARDS)
Before fixing the supplied brackets it is necessary to determine the installation dimensions A and B.
Start by putting the gate in position of "CLOSED DOOR".
Choose the sizes of A and B according to your installation and in order to obtain the desired degree of opening "α". This grade shown
in the table refers to the highest possible degree of openness with the corresponding dimensions.
To anchor the piston use the brackets provided.
WARNING!
The values given in the following tables are indicative and have been calculated considering the ideal conditions with a
gate of medium size, with a uniformly distributed filling and with both the internal mechanical stoppers installed. Keep
in mind that values may vary slightly and must be checked in advance.
TABLE 7 - HYPER 400 Recommended installation dimensions
A
155
B W ( α )
150 980 (110°)
160 987 (108°)
180
991 (100°)
200 989 (92°)
TABLE 8 - HYPER 600 Recommended installation dimensions
A
220
B W ( α )
220 1269 (110°)
240
1288 (110°)
260 1302 (108°)
280 1313 (105°)
TOP VIEW
B
A
6-1624982 - rev.3 - 03/11/2021
160 165
982 (110°) 984 (110°)
992 (110°) 983 (105°)
986 (98°) 981 (96°)
984 (90°) 982 (90°)
230 240
1270 (110°) 1273 (110°)
1290 (110°) 1292 (110°)
1310 (110°) 1295 (104°)
1303 (101°) 1293 (98°)
EXTERNAL SIDE
OF THE PROPERTY
INTERNAL SIDE OF
THE PROPERTY
170
985 (110°) 973 (104°)
978 (102°) 973 (100°)
976 (94°) 971 (93°)
981 (90°) 976 (88°)
250
1278 (110°) 1279 (110°)
1287 (107°) 1277 (104°)
1285 (101°) 1275 (99°)
1283 (96°) 1273 (94°)
W
175 180
968 (102°)
968 (98°)
966 (91°)
964 (85°)
260 270
1269 (107°)
1267 (101°)
1265 (97°)
1263 (92°)
English - 11