Allmatic Hyper 400 Manual Del Usuario página 23

TABLE 3 - HYPER 600 technical characteristics
TECHNICAL CHARACTERISTICS
Recommended control board
Supply voltage and frequency
Motor absorption
Motor power
Capacitor
Motor speed
Average opening time (90°)
Maximum gate size (Weight/Length)
Maximum thrust
Service
Recommended daily cycles
Weight of the motor
Operating temperature
Degree of protection
Emergency release
Internal mechanical stoppers
TABLE 4 - Stem stroke
AVAILABLE STEM STROKE
Without mechanical stoppers
With 1 mechanical stopper (opening)
With 2 mechanical stoppers (opening and closing)
ATTENTION! ONLY FOR 24V MOTORS
IN NO CASE SHALL THE MAXIMUM WEIGHTS AND DIMENSIONS GIVEN IN THESE TABLES BE
EXCEEDED.
ALWAYS USE THE SLOWDOWNS SET BY THE CONTROL UNIT FOR THE MOVEMENT OF THE
GATE.
WARNING!
In the graph next to it is reported, as an explanatory example, the
relationship between weight and length of the door for the gearmo-
tor HYPER 400 230vac.
6-1624982 - rev.3 - 03/11/2021
U.M.
BIOS2 24
24 Vdc
A 3
W 70
μF --
rpm 1700
sec. 25
100 kg / 4,5 m
140 kg / 3,5 m
200 kg / 2 m
N 1600
% 70
n° 100
kg 7
°C
IP
U.M. HYPER 400
mm 415
mm 395
mm 375
kg
300
200
100
1,5
HYPER 600
BIOS2 120 / BIOS2 230 /
ECO
120Vac 60Hz 230Vac 50Hz
1
120
31,5
1750
25
150 kg / 4,5 m 200 kg / 4,5 m
190 kg / 3,5 m 240 kg / 3,5 m
250 kg / 2 m 300 kg / 2 m
2000
50
100
8
-20°C ... +55°C
44
lever release with key
optional
HYPER 600
615
595
575
HYPER 400 230Vac
2 2,5
ECO
1
230
8
1450
30
2000
50
100
8
MT
3
English - 7