Using The Steam Reach Wand - Hoover SteamScrub 3-in-1 Manual De Instrucciones

Using your machine:

Using the steam reach wand

1
Press the
steam wand
release pedal and
pull the steam
wand and
handheld out
of the floorhead.
Always switch off the steamer and allow steamer to cool before attaching/detaching the steam
wand, floorhead, accessories and twin tank.Always stand steamer securely against a wall/fixed
When using the steam reach wand do not aim towards electrical components such as light
3 2
Use the arrows to
align the concentra-
tion nozzle to the end
of the steam wand.
Push the concen-
tration tool onto the
steam wand and
twist clockwise to
lock into position.
WARNING
!
structure or lie the steamer flat on the floor in a suitable location so it does
not become a trip hazard or can be stepped on.
fittings, sockets and wiring.
4
Plug the steamer into Press the centre
mains and slide the pad on the control
On/Off switch to On. panel to select
The green light will preferred setting
illuminate when it is steam/solution.
ready to use. The
steamer will automati-
cally set to Max steam
(no solution).
!
5
To produce steam
squeeze the trigger
in short bursts.
Don't hold the
trigger continuous-
ly to prevent
soaking.
see next page
16