Using Your Machine - Hoover SteamScrub 3-in-1 Manual De Instrucciones

Using your machine:

• The steamer and accessories get very hot during use,
always allow them to cool down before handling.
• Always unplug and switch off the steamer when assembling.
• Always switch off the steamer before emptying the water
tank or changing the cleaning pads/accessories.
• IMPORTANT: Please refer to floor manufacturer's care
recommendations before use and test the steamer
on a discrete area of flooring to begin with.
• When using the steamer, basic safety precautions should
always be observed.
• Don't aim the steamer at people, animals, plants or electrical
components such as interior of ovens or wires. Never touch
the steam spray or floor head from a short distance.
(There is a risk of scalding)
• The steamer is equipped with a thermostat and a thermal
cut out. If for any reason the steamer overheats it will switch
off. If this happens turn off and unplug the steamer, allow to
cool for a least 2 to 4 hours and re-start.
! WARNING
Never leave the steamer in one spot on any surface
for an extended period of time with
a damp or wet Microfiber pad attached as this
may damage the floor surface.
When cleaning hard floors, your Steam Mop should
only be used on tiles, linoleum, sealed hardwood
flooring, engineered hardwood, laminate,
vinyl and sealed stone floors.
If used on waxed flooring, you may
experience loss of glossiness.
To reduce the risk of personal injury, unplug the
steam cleaner when assembling the accessories.
Do not clean over floor electrical outlets.
Do not use steam cleaner or press the Steam
Trigger without water in the water tank.
IMPORTANT
!
Never use the Steam Mop without the Microfiber
pad properly attached to the Mop Head.
!
!
10