secudo D 110 Manual Del Usuario página 33

Explanation
The detector is in programming mode. The button has
been pressed and held down for approx. 2-3 seconds.
Programming has been successfuly completed.
The detector has been reset to the factory settings.
The button has been pressed and held down for a
minimum of approx. 5 seconds.
Solution
The device will automatically revert to standard mode
after approx. 1 minute
Press and hold down the button for a minimum of
approx. 5 seconds to restore factory settings.
Once the button is released, the detector reverts to
standard mode without radio communication
33