DBI SALA 3M 8000112 Manual De Instrucciones página 9

5.2 DEFECTS: If inspection reveals an unsafe or defective condition, remove the Confined Space HC Davit Assembly from
service immediately and contact 3M regarding replacement or repair. Do not attempt to repair the Fall Arrest System.
;
Authorized Repairs Only: Only 3M or parties authorized in writing may make repairs to this equipment.
5.3 PRODUCT LIFE: The functional life of the Confined Space HC Davit Assembly is determined by work conditions and
maintenance. As long as the product passes inspection criteria, it may remain in service.
6.0 MAINTENANCE, SERVICING, STORAGE
6.1 CLEANING: Periodically clean the Confined Space HC Davit Assembly's metal components with a soft brush, warm water,
and a mild soap solution. Ensure parts are thoroughly rinsed with clean water.
6.2 SERVICE: Only 3M or parties authorized in writing by 3M may make repairs to this equipment. If the
Confined Space HC Davit Assembly has been subject to fall force or inspection reveals an unsafe or defective conditions,
remove the system from service and contact 3M regarding replacement or repair.
6.3 STORAGE AND TRANSPORT: When not in use, store and transport the Confined Space HC Davit Assembly and
associated fall protection equipment in a cool, dry, clean environment out of direct sunlight. Avoid areas where chemical
vapors may exist. Thoroughly inspect components after extended storage.
7.0 LABELS
Figure 11 illustrates labels on the Confined Space HC Davit Assembly. Labels must be replaced if they are not fully legible.
9