Product Description - DBI SALA 3M 8000112 Manual De Instrucciones

;
Prior to installation and use of this equipment, record the product identification information from the ID label in the
Inspection and Maintenance Log (2) at the back of this manual.

PRODUCT DESCRIPTION:

Figure 1 illustrates the 3M™ Confined Space High Capacity (HC) Davit Assembly. The Confined Space HC Davit Assembly is used
to raise or lower a worker to a work space and provide a fall arrest or rescue anchorage point. This instruction applies to the
following Confined Space HC Davit Assembly components:
• (A) Short reach HC davit part number 8000107, long reach HC davit part number 8000108.
• (B) Four available mast extension lengths.
• (C) Universal assembly part number 8000109.
• (D) Short reach offset arm part number 8000110, (e) long reach offset arm part number 8000111.
• (F) Winch bracket part number 8000117 (included with universal assembly for rear mounted winch or SRL; additional
winch bracket 8000117 required for front mounted winch or SRL).
The Confined Space HC Davit Assembly mast is installed into an appropriate 3M base, available separately. See Table 1 -
Specifications.
;
Base installation must be approved to local regulations by a qualified engineer. Refer to the base installation instructions.
Confined Space HC Davit Assembly mast extensions cannot be stacked. A maximum of one mast extension may be used per
davit base.
System Specifications:
Capacity: Fall Arrest: EN795:2012 and CEN/TS 16415:2013 rated for one or two users.
Rescue: EN1496:2006 rated for one user with a maximum combined weight of 140 kg (310 lbs),
including tools and equipment, on line during operation.
Material Handling: 205 kg (450 lbs) when used on any 3M HC portable base (3-piece, truck hitch or
counterweight cart), and a 340 kg (750 lbs) capacity when used on any 3M HC permanent base (floor
mount, wall mount, deck mount, or core mounts). See Material Handling Capacity specifications below:
Material Handling
Capacity (kg, lbs)
205 kg (450 lbs)
205 kg (450 lbs)
205 kg (450 lbs)
205 kg (450 lbs)
340 kg (750 lbs)
340 kg (750 lbs)
340 kg (750 lbs)
340 kg (750 lbs)
340 kg (750 lbs)
Dimensions: See Figure 1 for the dimensions of Confined Space HC Davit Assembly components.
Product Weight: See Figure 1 for the weight of Confined Space HC Davit Assembly components.
Certification:
HC davit arms and HC mast extensions certifications when used with portable or permanent
HC bases
Portable Bases
3-Piece base (8000104, 8000105)
Truck hitch base (8000103)
Counterweight cart base (8000106)
Permanent Bases
Floor mount base (8000095, 8000096)
Wall mount base (8000101, 8000102)
Deck mount base (8000099, 8000100)
Core mount base (8000089, 8000090)
Core mount w/ top plate base (8000091, 8000092)
Table 1 – Specifications
3M Base Description
Short reach 3-piece base
Long reach 3-piece base
Truck hitch base
Counterweight cart base
Floor mount base
Wall mount base
Deck mount base
Core mount base
Core mount w/ top plate base
6
3M Base Part Number
8000104
8000105
8000103
8000106
8000095 – Galvanized
8000096 - Stainless
8000101 – Galvanized
8000102 - Stainless
8000099 – Galvanized
8000100 - Stainless
8000089 – Galvanized
8000090 - Stainless
8000091 – Galvanized
8000092 - Stainless
EN795:2012
CEN/TS16415:2013
Certified (Type B)
Certified (Type B)
Certified (Type B)
Meets (Type A)
Meets (Type A)
Meets (Type A)
Meets (Type A)
Meets (Type A)
EN1496:2006
Meets (Class B)
Meets (Class B)
Meets (Class B)
Meets (Class B)
Meets (Class B)
Meets (Class B)
Meets (Class B)
Meets (Class B)