Tabla de contenido
Idiomas disponibles
Idiomas disponibles
age supplied is the same as that one specified
on the nameplate of the tool. To use a not
specified voltage may cause a serious injury to
the user as well as damage the tool.
IMPORTANT: This appliance is not intended
for use by persons (including children) with re-
duced physical, sensory or mental capabilities
may be different or reduced, or lack of experi-
ence or knowledge, unless such persons are su-
pervised or trained to operate the product by
a person responsible for their safety. Children
should be supervised to ensure they do not use
the devices as toys.
TOOL USE AND CARE
Do not force the power tool. Use the correct
tool for the application. The correct tool will
do the job better and more safely at the rate
that it was designed to work at.
Do not use tools if switch does not turn it on
or off. Any tool that cannot be controlled with
the switch is dangerous and must be repaired.
Disconnect the plug from the power source
before making any adjustments, changing ac-
cessories or storing the tool. This preventive
safety measures reduce the risk of accidental
starting of the tool.
When the power tool is not in use, store it out
of the reach of children, and do not allow in-
dividuals who are not familiar with the power
tool or these instructions to operate it. Power
tools are dangerous in the hands on untrained
users.
Maintain the power tool. Check for misalign-
ment or binding of moving parts, broken parts,
and any other condition that may affect the
operation of the power tool. If it is damaged,
have it repaired before using. Many accidents
are caused by poorly maintained power tools.
Check for misalignment or bonding of moving
parts, breakage parts, and any other condition
that may affect the tools operation. If you find
a damaged tool, take it to service before use it.
Use only accessories that are recommended by
the manufacturer of your model. Suitable ac-
cessories for one tool, may become hazardous
when are used on another tool.
Keep cutting tools, sharpened and clean. Cut-
ting tools in good condition with sharpened
14
edges, are less likely to stuck in workpieces or
easier to control.
Is recommendable to use a safety device suit-
able, such a thermal and differential switch
when you are using an electric equipment.
SERVICE
Tool service must be performed only by quali-
fied repair personnel. Service or maintenance
performed by unqualified personnel could re-
sult in a risk of injury.
SPECIFIC SAFETY RULES FOR
SCROLL SAW
1. SCROLL SAW SAFETY BEGINS with your lum-
ber. Inspect your stock carefully before you
begin a cut. If you have any doubts about the
stability or structural integrity of your stock,
DO NOT CUT!
2. KEEP HANDS AWAY FROM BLADE. DO NOT
hold pieces so small that your fingers go under
the blade guard. DO NOT reach underneath
work or in blade cutting path with your hands
or fingers for any reason.
3. AVOID POSITIONS where a slip could cause
your hand to go into the blade.
4. NEVER USE YOUR SCROLL SAW WITH THE
BLADE GUARD REMOVED.
5. WAIT UNTIL BLADE IS STOPPED before clear-
ing away cut-off pieces.
6. UNPLUG YOUR SCROLL SAW and remove the
safety switch key before changing blades, ad-
justments, or performing maintenance.
7. USE BLADES APPROPRIATE FOR YOUR MA-
CHINE, material being cut, and the type of cut
that you are performing.
8. DO NOT START THE SAW WITH THE BLADE
IN CONTACT WITH THE WORKPIECE.
9. SUPPORT LARGE WORKPIECES to reduce
blade breakage and pinching.
10. FIRMLY SECURE YOUR SCROLL SAW to a
stable, level table or workbench using clamps
or bolts. The saw may move when cutting large
workpieces if not secured.
11. PROLONGED EXPOSURE TO WOOD DUST IS
KNOWN TO CAUSE CANCER IN HUMANS. Al-
ways wear an OSHA approved respirator when
working in an environment that could contain
wood dust.
Tabla de contenido
