Precautions For Use; Cautions When Transporting; Cautions When Installing - Christie LX1750 Manual Del Usuario

Ocultar thumbs Ver también para LX1750:
Tabla de contenido
Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 321

Precautions for use

Precautions for use

Cautions when transporting

z When transporting the projector, hold it securely by its carry handle and avoid excessive vibration and impacts
by such handling as dragging it on the floor. Failure to do so may damage the internal parts and result in
malfunctions.
z Do not transport the projector with the adjustable feet extended. Doing so may damage the adjustable feet.

Cautions when installing

■ Do not set up the projector outdoors.
z
The projector is designed for indoor use only.
■ Do not use in the following places.
z
z
z Places where vibration and impacts occur such as in a vehicle or vessel: Doing so may damage the
internal parts and result in malfunctions.
z
z Near the exhaust of an air conditioner or near lights (studio lamps, etc.) where there are large swings in
temperature ("Operating environment" (
deformation of the outer case, which may in turn cause malfunctions.
z
z Near high-voltage power lines or near motors: Interference may occur.
■ Be sure to ask a qualified technician or your dealer before installing the
z
product on a ceiling.
If the product is to be installed hanging from the ceiling, purchase the optional ceiling mount bracket.
■ Do not install the projector at elevations of 2 700 m (8 858 ft) or higher
z
above sea level.
Failure to do so may shorten the life of the internal parts and result in malfunctions.
■ Do not use the projector while it is tilted (
z
Using the projector while tilted may shorten the life of the internal parts.
■ Cautions when setting up the projectors
z
z
z Do not block the ventilation ports (intake and exhaust) of the projector.
z
z Avoid heated and cooled air from the air conditioning system directly blow to the ventilation ports (intake
and exhaust) of the projector.
z
z Avoid setting up the projector in a humid or dusty location.
1 m (39")
z
z Do not install the projector in a confined space.
When it is necessary to install in a confined space, install an air conditioning or ventilation system for the
space. If ventilation is insufficient, exhaust heat may accumulate and trigger the protection circuit of the
projector.
14 - ENGLISH
page 103)): Doing so may shorten the life of the lamp or result in
1 m (39")
1 m (39")
page 24).
(over 1 m (39") for each top and side)
1 m (39")
LX1750 User Manual
020-000638-01 Rev.1 (11-2013)
Tabla de contenido

Solución de problemas

loading

Tabla de contenido